T Make Silk Magic PLA Dual Color Filament 1.75mm 1 Kg
Silk Magic PLA Sual Color
Model No.：Dual Color in One Line Magic PLA
Diameter Format：1.75mm
Print Temp.：190-220℃
Tolerance：±0.05mm
Print Speed：50-100mm/s
Platform Temp：no need
N.W.：1KG
G.W.：1.3KG
Packing Size：209*209*73mm
Length：1.75mm(1KG)=330m
Tensile Strength：11-16KGF
Melt Flow Rate：4-8g/10min(190℃2.16kg)
Matte Magic PLA Filament Dual Color
Note: This filament is wounded on a cardboard spool
Bring some Matte Magic to your 3D prints with this range of dual colour matte filament. The beauty of dual colour printing with the finish of Matte filament. The blend of 2 colours will feature on your 3D print. Matte filaments tend to be more chalky than regular PLA and it is recommended that you adjust the tensioner on your printer to better grip the filament.
Please refer to images as a guide
Note the orientation of filament when loaded into your 3D printer will impact what your final print looks like. While we do not expect the filament to twist during printing should it twist this will also impact your final print result.
We recommend initially printing a calibration coin to understand how the dual colour filament will colour change on your particular printer.
Note: We have achieved best results when drying out filament first.
1.75mm PLA filament -The dichromatic PLA filament two color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers.
Matte PLA filament - Matte printing surface makes the layers less obvious. Unique based recipe assures less stringing and better overhang performance.
No warping & Good Layer Bonding - Excellent first layer adhesion to reduce warpage shrinkage curl and print failure. Good layer bonding strength make the printing parts stronger.
Purity material & Precision Diameter - Full 1KG 3D printer filament reel perfect roundness and 0.05mm diameter tolerance good winding avoid print failure jam or clog and making you a smoothly printing & better surface.
The color in the photo may not match the actual color of the filament due to the shooting light.
(5)
(4)